Chevrolet 2008 HHR Owner'S Manual Download Page 48 | Manualshive

Page: 48 / 430

Chevrolet 2008 HHR Owner'S Manual Download Page 48

Lower Anchors

Lower anchors (A) are metal bars built into the vehicle.
There are two lower anchors for each LATCH seating
position that will accommodate a child restraint with
lower attachments (B).

Top Tether Anchor

A top tether (A, C) anchors the top of the child restraint
to the vehicle. A top tether anchor is built into the
vehicle. The top tether attachment (B) on the child
restraint connects to the top tether anchor in the vehicle
in order to reduce the forward movement and rotation
of the child restraint during driving or in a crash.

Your child restraint may have a single tether (A) or a
dual tether (C). Either will have a single attachment (B)
to secure the top tether to the anchor.

1-44

«
...
46
47
48
49
50
...
»

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Reviews:

No comments