manualshive.com logo in svg

Chevrolet 2008 HHR, Owner'S Manual, Page: 344 / 430

Share
Download
Chevrolet 2008 HHR Owner'S Manual Download Page 344

Removing the Flat Tire and
Installing the Spare Tire (SS Model)

The SS Model has larger performance brakes than
the Base Model. The compact spare tire will not clear
the front brakes.

Do not use the compact spare tire in the event of a front
flat tire.

You must use the rear tire to replace the front flat tire.

To change the rear road tire:

Rear Tire Changing Procedure

1. Do a safety check before proceeding. See Changing

a Flat Tire on page 5-86 for more information.

2. Using the wheel wrench, loosen all the wheel nuts

on the rear tire. Do not remove them yet.

5-90

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Reviews:

No comments