Chevrolet 2008 HHR Owner'S Manual Download Page 376

Page: 376 / 430

Engine Compartment Fuse Block

The underhood fuse block is located on the driver side
of the engine compartment. Lift the cover to access
the fuse/relay block.

Notice: Spilling liquid on any electrical components
on your vehicle may damage it. Always keep the
covers on any electrical component.

Fuses

Usage

Electric Power Steering

Rear Defogger

Empty

Body Control Module 3

Starting System

Body Control Module 2

Rear Power Plug (Panel Van Only),
Cooling Fan (SS only)

Empty

Air Conditioning Clutch Diode

Liftgate, Sunroof

Empty

Rear Power Outlet (Panel Van Only)

Fuel Pump

Rear Wiper

Mirror

Air Conditioning

Heated Seats (Option)

5-122

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Search results

Summary of Contents for 2008 HHR

Reviews:

Chevrolet 2008 HHR, Owner'S Manual, Page: 376 / 430

Search results

Summary of Contents for 2008 HHR

Reviews: