Chevrolet 2008 HHR Owner'S Manual Download Page 11 | Manualshive

Page: 11 / 430

Chevrolet 2008 HHR Owner'S Manual Download Page 11

Head Restraints

Adjust the head restraint so that the top of the restraint
is at the same height as the occupant’s head. This
position reduces the chance of a neck injury in a crash.

Pull the head restraint up
to raise it. To lower the
head restraint, press
the button, located on the
top of the seatback,
and push the restraint
down. Only the front head
restraints are adjustable.

Both the front and rear head restraints can be removed.
Press the button, located on the top of the seatback,
and pull the restraint out from the seatback. Do
not remove the head restraint if someone will be sitting
in that seat while the vehicle is moving.

1-7

«
...
9
10
11
12
13
...
»

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Reviews:

No comments