Chevrolet 2008 HHR Owner'S Manual Download Page 339

Page: 339 / 430

4. Turn the sealant canister so the inflator filling hose

is aligned with the slot in the compressor.

5. Lift the sealant canister from the compressor and

replace with a new sealant canister. See your
dealer/retailer for more information.

To install a new sealant canister, do the following:

1. Align the sealant filling hose with the slot in the

air compressor.

2. Push the sealant canister down and turn it

clockwise.

3. Wrap the sealant filling hose around the air

compressor channel to stow it in its original location.

4. Push the air compressor inflator hose onto the

sealant canister inlet and push the lever down.

5-85

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Search results

Summary of Contents for 2008 HHR

Reviews:

Chevrolet 2008 HHR, Owner'S Manual, Page: 339 / 430

Search results

Summary of Contents for 2008 HHR

Reviews: