manualshive.com logo in svg

Chevrolet 2008 HHR, Owner'S Manual, Page: 127 / 430

Share
Download
Chevrolet 2008 HHR Owner'S Manual Download Page 127

{

CAUTION:

If you were to carry things on the adjustable
panel when it is in the upper (cargo cover) or
center positions, during a sudden vehicle
movement or a crash, those things could be
thrown around in the vehicle. You or others
could be injured. When it is in the upper or
center position, always secure any cargo on
the floor beneath the panel/cover.

To use the panel in the second position:

1. Insert the front corners of the panel into the top

guides.

2. Slide the panel forward.

3. Press down on the back of the panel to lock it in

place.

The third position is with the front corners placed in the
lower guides and the rear corners placed in the
upper guides. Do not load cargo on the panel in this
position.

2-49

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Reviews:

No comments