manualshive.com logo in svg

Chevrolet 2008 HHR, Owner'S Manual, Page: 13 / 430

Share
Download
Chevrolet 2008 HHR Owner'S Manual Download Page 13

3. To fold the seat flat, pull up on either lever located

toward the rear of the seatback. Fold the seat
forward until the seatback disengages.

4. Continue to fold the seat forward until it locks in the

folded position. Pull up on the seatback to be sure
it is locked.

To raise the seatback to an upright position:

1. Pull up on either lever.

2. Push the seatback up until it is in a locked position.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

3. Push and pull on the seatback to make sure it is

locked.

1-9

Summary of Contents for 2008 HHR















































































































































































































































































































































































































































Reviews:

No comments