Chevrolet 2002 Silverado 1500 Pickup Owner'S Manual Download

Page: 471 / 497

Scheduled Maintenance

7-16

100,000 Miles (166 000 km)

j Inspect spark plug wires.

An Emission Control Service.

j Replace spark plugs.

An Emission Control Service.

j Change automatic transmission fluid and filter if the vehicle’s GVWR is over

8600 lbs., if the vehicle has an Allison transmission or if the vehicle is mainly
driven under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly

reaches 90

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

j If you haven’t used your vehicle under severe service conditions listed

previously and, therefore, haven’t changed your automatic transmission fluid,
change both the fluid and filter.

j Automatic Transfer Case Only: Change transfer case fluid.

j Except 8.1L V8 Engine: Inspect Positive Crankcase Ventilation (PCV) valve.

An Emission Control Service.

ACTUAL

SERVICED BY:

MILEAGE

DATE

Summary of Contents for 2002 Silverado 1500 Pickup

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Silverado 1500 Pickup

Reviews:

Related manuals for 2002 Silverado 1500 Pickup

Brands by name

Popular brands

Chevrolet 2002 Silverado 1500 Pickup, Owner'S Manual

Search results

Summary of Contents for 2002 Silverado 1500 Pickup

Reviews:

Related manuals for 2002 Silverado 1500 Pickup

Brands by name

Popular brands