manualshive.com logo in svg

Chevrolet 2002 Silverado 1500 Pickup, Owner'S Manual

The Chevrolet 2002 Silverado 1500 Pickup Owner's Manual is a comprehensive guide designed to assist you in maximizing the potential of your vehicle. Offering detailed instructions and essential information, this manual is available for free download at manualshive.com, ensuring an effortless and convenient experience.

Share
Download
background image

6-43

What to Add

When you do need brake fluid, use only DOT

-

3 brake

fluid. Refer to “Recommended Fluids and Lubricants”
in the Index. Use new brake fluid from a sealed
container only.

Always clean the brake fluid reservoir cap and the area
around the cap before removing it. This will help keep
dirt from entering the reservoir.

CAUTION:

With the wrong kind of fluid in your brake
system, your brakes may not work well, or they
may not even work at all. This could cause a
crash. Always use the proper brake fluid.

NOTICE:

D Using the wrong fluid can badly damage

brake system parts. For example, just a few
drops of mineral

-

based oil, such as engine

oil, in your brake system can damage brake
system parts so badly that they’ll have to be
replaced. Don’t let someone put in the
wrong kind of fluid.

D If you spill brake fluid on your vehicle’s

painted surfaces, the paint finish can be
damaged. Be careful not to spill brake fluid
on your vehicle. If you do, wash it off
immediately. See “Appearance Care” in 
the Index.

Summary of Contents for 2002 Silverado 1500 Pickup


















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Silverado 1500 Pickup

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
MAcarbon Ferrari 360 Map Carbon Light Installation Instructions preview
Ferrari 360 Map Carbon Light
Brand: MAcarbon Pages: 4
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
RAM Truck Diesel Supplement 2012 Owner'S Manual preview
Truck Diesel Supplement 2012
Brand: RAM Pages: 174
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5
PowerMadd Tri-mount Installation Instructions preview
Tri-mount
Brand: PowerMadd Pages: 3

Brands by name

Popular brands

Load more brands