Chevrolet 2002 Silverado 1500 Pickup Owner'S Manual Download | Manualshive

Page: 324 / 497

background image

4-96

Power Winches

If you wish to use a power winch on your vehicle, only
use it when your vehicle is stationary or anchored.

NOTICE:

Using a power winch with the transmission in
gear may damage the transmission. When
operating a power winch, always leave the
transmission in NEUTRAL (N).

Use the regular brakes, set the parking brake, or block
the wheels to keep your vehicle from rolling.

Power Take-Off (PTO) (If Equipped)

Before using a PTO, refer to the manufacturer’s or
installer’s instructions.

To engage a PTO on a vehicle with a manual
transmission do the following:

1. Hold the clutch pedal down.

2. Set the parking brake.

3. Shift the transmission into NEUTRAL (N).

4. Engage the PTO. Refer to the manufacturer’s

or installer’s for instructions on electrically
engaged PTOs.

5. For mobile operations, shift the transmission into the

gear you want, apply the regular brakes and release
the parking brake. For stationary operations, leave
the parking brake applied.

6. Release the clutch and regular brakes as you

normally would. When the clutch is released, the
PTO will start.

7. Turn the PTO rotary switch to ON.

To engage a PTO on a vehicle with an automatic
transmission do the following:

1. For stationary use shift the transmission

into PARK (P).

2. Turn the PTO rotary switch ON.

3. If the engine speed is below the PTO engage speed

limit, the PTO will start. The blinking LED on the
PTO control switch indicates PTO engage is
requested. When PTO engages the LED will switch
from blinking to a steady light.

«
...
322
323
324
325
326
...
»

Summary of Contents for 2002 Silverado 1500 Pickup


















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Silverado 1500 Pickup

Brand: Hama Pages: 2

Brand: Jeep Pages: 322

Brand: Jeep Pages: 341

Brand: Jeep Pages: 310

Brand: Jeep Pages: 189

Brand: Jeep Pages: 26

Brand: Jeep Pages: 21

Brand: Fabbri Pages: 4

Brand: Allen Sports Pages: 2

PICASSO XSARA DESIRE 1.6 - MESUREMENT

Brand: CITROEN Pages: 2

Brand: PullRite Pages: 10

Brand: Honda Pages: 32

Brand: Webasto Pages: 34

Dunlop L.D02.C.M

Brand: Sumitomo Pages: 22

Brand: Anker Technology Pages: 8

Airgo Active cushion / Comfort

Brand: TOGU Pages: 2

Brand: Acura Pages: 4

Brand: MayPole Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands