background image

6-56

Tires

Your new vehicle comes with high

-

quality tires made by

a leading tire manufacturer. If you ever have questions
about your tire warranty and where to obtain service, see
your GM Warranty booklet for details.

CAUTION:

Poorly maintained and improperly used tires 
are dangerous.
Overloading your tires can cause

overheating as a result of too much friction.
You could have an air

-

out and a serious

accident. See “Loading Your Vehicle” in 
the Index.

CAUTION: (Continued)

CAUTION: (Continued)

Underinflated tires pose the same danger 

as overloaded tires. The resulting accident
could cause serious injury. Check all tires
frequently to maintain the recommended
pressure. Tire pressure should be checked
when your tires are cold.

Overinflated tires are more likely to be 

cut, punctured or broken by a sudden
impact 

--

 such as when you hit a pothole.

Keep tires at the recommended pressure.

Worn, old tires can cause accidents. If your

tread is badly worn, or if your tires have
been damaged, replace them.

Summary of Contents for 2002 Silverado 1500 Pickup


















































































































































































































































































































































































































































































































Reviews: