Chevrolet 2002 Silverado 1500 Pickup Owner'S Manual Download Page 467

Page: 467 / 497

Scheduled Maintenance

7-12

50,000 Miles (83 000 km)

j Change automatic transmission fluid and filter if the vehicle’s GVWR is over

8600 lbs., if the vehicle has an Allison transmission or if the vehicle is mainly
driven under one or more of these conditions:

– In heavy city traffic where the outside temperature regularly

reaches 90

_F (32_C) or higher.

– In hilly or mountainous terrain.
– When doing frequent trailer towing.
– Uses such as found in taxi, police or delivery service.

Except Allison Transmission: If you do not use your vehicle under any of these
conditions, change the fluid and filter at 100,000 miles (166 000 km).

j Automatic Transfer Case Only: Change transfer case fluid.

52,500 Miles (87 500 km)

j Check rear/front axle fluid level and add fluid as needed. Check constant

velocity joints and axle seals for leaking.

j Rotate tires. See “Tire Inspection and Rotation” in the Index for proper

rotation pattern and additional information. (See fo.)

ACTUAL

SERVICED BY:

MILEAGE

DATE

ACTUAL

SERVICED BY:

MILEAGE

DATE

Summary of Contents for 2002 Silverado 1500 Pickup

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Silverado 1500 Pickup

Reviews:

Related manuals for 2002 Silverado 1500 Pickup

Brands by name

Popular brands

Chevrolet 2002 Silverado 1500 Pickup, Owner'S Manual

Search results

Summary of Contents for 2002 Silverado 1500 Pickup

Reviews:

Related manuals for 2002 Silverado 1500 Pickup

Brands by name

Popular brands