Chevrolet 2002 Silverado 1500 Pickup, Owner'S Manual

Page: 65 / 497

1-58
CAUTION:
If a LATCH
-
type child restraint isn’t attached to
its anchorage points, the restraint won’t be able
to protect a child sitting there. In a crash, the
child could be seriously injured or killed. Make
sure that a LATCH
-
type child restraint is
properly installed using the anchorage points, or
use the vehicle’s safety belts to secure the
restraint. See “Securing a Child Restraint in the
Center Rear Seat Position (Extended Cab and
Crew Cab)” or “Securing a Child Restraint in the
Right Front Seat Position” in the Index for
information on how to secure a child restraint in
your vehicle using the vehicle’s safety belts.
Securing a Child Restraint Designed for the
LATCH System
1. Find the anchors for the seating position you want to
use, where the bottom of the seatback meets the back
of the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4. If the child restraint is forward
-
facing, attach the top
strap to the top strap anchor. See “Top Strap” in the
Index. Tighten the top strap according to the child
restraint instructions.
5. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.