I N S TA L L AT I O N I N S T R U C T I O N S
APPLICATION: SKID PLATE ASSEMBLY FOR BULL BARS
75-0301
Revision
03/13/01
1
2
5
2
4
3
SKID PLATE ASSEMBLY
5/32” ALLEN WRENCH
MOUNT CLAMPS
7/16” WRENCH
1/4-20 X .75 BUTTON HEAD CAP SCREW
1/4-20 NYLON INSERT LOCK NUT
1/4” FLAT WASHER
1/4” INTERNAL TOOTH LOCK WASHER
FASTENERS ARE BAGGED IN KIT 60-1203.
PARTS KIT CONTENTS
TOOLS REQUIRED
QTY
DESCRIPTION
STEP 1.
STEP 2.
Remove the contents from the box and check for any damage. Verify all parts against the parts list.
Read and understand instructions completely before beginning installation.
STEP 3
.
Install (3) 1/4-20 x .75” Button Head Cap Screws and (3) 1/4” Internal Tooth Lock Washers with 5/32” Allen
Wrench to bottom of Center Tube on Bull Bar Assembly. Leave loose.
Slide Mount Clamps over ends of Bull Bar Legs with clamp flanges under skid plate. Install (2) 1/4-20 x .75 Button
Head Cap Screws, (4) 1/4” Flat Washers and (2) 1/4-20 Nylon Insert Lock Nuts.
Tighten and torque 1/4” Fasteners to 50 IN. LBS.
STEP 4.
STEP 5.
SKID PLATE
ASSEMBLY
31-0190
