Chattanooga Intelect Shortwave 400 3813 User Manual Download Page 4 | Manualshive

Page: 4 / 58

background image

Intelect® Shortwave 400

FOrEwOrd

1

This manual has been written for the owners of the Intelect® Shortwave 400 system. It contains general information on the operation,
precautionary practices, and maintenance information. In order to maximize use, efficiency, and the life of your unit, please read this
manual thoroughly and become familiar with the controls, as well as the accessories, before operating the unit. This manual contains
general safety, operating, maintenance, and care instructions for the owners and operators of the Intelect Shortwave 400 system.
Specifications put forth in this manual were in effect at the time of publication. However, owing to DJO, LLC's policy of continual
improvement, changes to these specifications may be made at any time without obligation on the part of DJO, LLC.
Before administering any treatment to a patient, the user of this equipment should read, understand, and follow the information contained
in this manual for each mode of treatment available, as well as the indications, contraindications, warnings, and precautions. Consult other
resources for additional information regarding the application of shortwave therapy.

Product Description

The Intelect Shortwave 400 system utilizes both inductive and capacitive electrodes to administer electromagnetic energy to the patient’s
body at shortwave frequencies.
Stay current with the latest clinical developments in the field of shortwave therapy. Observe all applicable precautionary measures for
treatment.
Keep informed on appropriate indications and contraindications for the use of shortwave therapy.

this equipment is to be used and sold only under the prescription and supervision of a licensed practitioner .
this product is nOt FOR SalE or uSE in the united States of america or any of its territories .

© 2012 DJO, LLC. All rights reserved. Any use of editorial, pictorial, or layout composition of this publication without express written consent from DJO, LLC is strictly prohibited. This publication
was written, illustrated, and prepared for distribution by DJO, LLC.

«
...
2
3
4
5
6
...
»

Summary of Contents for Intelect Shortwave 400 3813



























































Reviews:

No comments

Related manuals for Intelect Shortwave 400 3813

Brand: Campbell Pages: 18

Brand: Vector Pages: 4

BODY ARMOR PRO TERM

Brand: Darco Pages: 6

Brand: Eaton Pages: 16

Brand: Eaton Pages: 6

Brand: Ecco Pages: 17

Brand: ParaBody Pages: 3

Brand: Hach Pages: 52

Brand: hager Pages: 2

Brand: VBM Pages: 36

Brand: W&H Med Pages: 122

Brand: Nabtesco Pages: 26

Brand: Nectar Pages: 46

Brand: Neauvia Pages: 17

Brand: Pari Pages: 282

Brand: Baileigh Industrial Pages: 12

Implantmed SI-1010

Brand: W&H Pages: 2

Brand: TANNER Scientific Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands