manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 86

Intelect® Transport Combo

83

MAINTENANCE

FACTORY SERVICE

When the Intelect Transport Combo requires factory service, contact the selling dealer or Chattanooga Group Service Department. All units 
returned to the factory for service must include the following:

WARRANTY REPAIR/OUT OF WARRANTY REPAIR

 

1. 

Written statement containing the following information:

    • RA (Return Authorization) Number- Obtain from Factory
   • 

Model Number

   • 

Serial Number

   • 

Contact Person with Phone and Fax Numbers

   • 

Billing Address (for Out of Warranty Repair)

   • 

Shipping Address (Where to Ship Unit after Repair)

   • 

Detailed Description of Problem or Symptoms

 

2. 

Copy of original invoice issued at purchase.

 

3. 

Ship the unit to address specified by an authorized service technician.

Service to these units should be performed only by Service Technicians certified by Chattanooga Group.

EU Directive on Waste Electrical 
and Electronic Equipment 
(WEEE) ensures that product 
is appropriately disposed of or 
recycled at the end of its life.

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands