manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 17

Intelect® Transport Combo

14

OVERVIEW

The Intelect Transport Combo, designed and manufactured by Chattanooga Group, offers a new dimension in portable electrotherapy 
and ultrasound made possible by advanced software design and digital signal processing. The result is a unit with extraordinary versatility 
based on simplicity of operation.

The Intelect Transport Combo offers "On the Go" clinical electrotherapy and ultrasound. The unit provides an innovative case design, with a 
logical control system and a large, easy to read graphical LCD. User defined protocols allow you to customize any treatment to the specific 
needs of your patient. The repositional base allows the unit to be configured for desktop or wall-mount use. 

The following features are available on the Intelect Transport Combo:

Two channels of electrotherapy stimulation output
Four waveforms - Russian, High Voltage Pulsed Current (HVPC), Interferential and Premodulated
1 or 3.3 MHz frequencies for each applicator (excluding the 1 cm

2

 sound head)

Four available sound heads: 1 cm

2

, 2 cm

2

, 5 cm

2

, and 10 cm

2

Fifteen user-defined memory positions
Lightweight design
Battery powered option

Common Terms

Applicator 

- This apparatus is the hand held assembly used to deliver ultrasonic energy. The applicator includes the sound head, 

transducer, and related electronics.

Accommodation

 - This condition is where nerves lose their ability (sensitivity) to respond to electrotherapy.

Amplitude Modulation (Ampl. Mod.) 

-  Amplitude Modulation is an increase and decrease in intensity during treatment. For example, at 

an 80% amplitude modulation, with the intensity set to 10 mA, the intensity decreases to 2 mA, and then increases to 10 mA throughout 
the treatment. The available amplitude modulations are 40%, 60%, 80%, 100%, and Static (none).

•
•
•
•
•
•
•

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands