manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 7

Intelect® Transport Combo

SAFETY PRECAUTIONS

4

Where the integrity of the external protective earth conductor 
arrangement is in doubt, equipment shall be operated from its 
internal electrical power source.
Using a high intensity electrotherapy setting in conjunction with 
high intensity ultrasound setting may cause the unit to reset.
The battery pack should be removed when storing the unit for 
extended periods of time.
DO NOT disassemble, modify, or remodel the unit or accessories. 
This may cause unit damage, malfunction, electrical shock, fire, or 
personal injury.

•

•

•

•

DO NOT remove the cover. This may cause unit damage, 
malfunction, electrical shock, fire, or personal injury. There are 
no user-serviceable parts inside the unit. If a malfunction occurs, 
discontinue use immediately and consult the dealer for repair 
service.
Failure to use and maintain the Intelect Transport Combo and its 
accessories in accordance with the instructions outlined in this 
manual will invalidate your warranty.

Nylatex® Wraps contain dry natural rubber and may cause allergic 
reactions in patients with allergies to latex.

•

•

•

CAUTIONS CONTINUED

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands