Chattanooga Group Intelect Transport Combo User Manual Download Page 56

Page: 56 / 88

Intelect® Transport Combo

OPERATION

STARTING, STOPPING, AND INTERRUPTING COMBINATION THERAPY CONTINUED

Press

the

Enter

button.

The Ultrasound parameters screen displays with the Edit Stim option highlighted.

NOTE:

When you are using combination therapy for Channel 1 (all waveforms

except Interferential), you may only set up electrotherapy for Channel 1. If you

want to use both channels of electrotherapy in conjunction with ultrasound,

you must first begin treatment. You may set up electrotherapy for Channel 2

later

these

procedures

(

step 21

Press the Up and Down Arrow buttons to highlight Waveform.

Press

the

Enter

button.

The

Waveform

displays.

10.

Press the Up and Down Arrow buttons to highlight the appropriate waveform.

11.

Press the Enter button to accept the selection.

The

Waveform

closes.

12.

Press the Up and Down Arrow buttons to highlight Edit Stim.

13.

Press the Enter button to accept the selection.

The

current

waveform's

parameters

display.

Summary of Contents for Intelect Transport Combo

























































































Search results

Summary of Contents for Intelect Transport Combo

Reviews:

Related manuals for Intelect Transport Combo

Brands by name

Popular brands

Chattanooga Group Intelect Transport Combo, User Manual

Search results

Summary of Contents for Intelect Transport Combo

Reviews:

Related manuals for Intelect Transport Combo

Brands by name

Popular brands