manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 31

Intelect® Transport Combo

SPECIFICATIONS

28

SOUND HEAD SPECIFICATIONS 

1 cm

2 

Sound Head

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3.3 MHz (all +/- 5%)
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 watt to 2 watts
Effective Radiating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7 cm

2

 – 1 cm

2

Maximum beam non-uniformity ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0:1
Beam Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collimating 

5 cm

2 

Sound Head

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MHz, 3.3 MHz (all +/- 5%)
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 watt to 10 watts
Effective Radiating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.5 cm

2

 – 5 cm

2

Maximum beam non-uniformity ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0:1
Beam Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collimating

2 cm

2

 Sound Head

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MHz, 3.3 MHz (all +/- 5%)
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 watt to 4 watts
Effective Radiating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4 cm

2

 – 2 cm

2

Maximum beam non-uniformity ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0:1
Beam Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collimating
 

Head Warming Feature

The Head Warming feature of an Intelect Transport Combo 
utilizes Ultrasound output resulting in warming of the Sound 
Head to increase patient comfort.
With Head Warming enabled, ultrasound is emitted without 
pressing the Start button. The Applicator LED will not illuminate 
during the Head Warming period. US Channel will indicate "Head 
Warming".
Output . . . . . . . . . . . . . . . . . . . . . . .0 - 50% Cycling of maximum power 
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 MHz
Sound Head Temperature  . . . . . . . . 85 °F - 110 °F  (29.4 °C - 43.3 °C)

10 cm

2 

Sound Head

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MHz, 3.3 MHz (all +/- 5%)
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MHz: 0 watt to 20 watts
 (0 to 15 watts if 2 channels of electrotherapy are used simultaneously)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 MHz: 0 watt to 10 watts
Effective Radiating Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 cm

2

 – 10 cm

2

Maximum beam non-uniformity ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0:1
Beam Type  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collimating

Do not apply the Ultrasound Applicator to the patient during the Head 
Warming period. Applicator must remain in Applicator Hook duing the 
Head Warming period.

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands