manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 63

Intelect® Transport Combo

60

OPERATION

CREATING A USER PROTOCOL FOR COMBINATION THERAPY

To create User Protocols for combination therapy, do the following:

 

 

 

 

 

1. 

On the Home screen, press the Up and Down Arrow buttons to highlight Combo.

  2. 

Press the Enter button.

      The 

Ultrasound 

parameter 

screen 

displays.

 

 

 

 

 

3. 

Press the Up and Down Arrow buttons to highlight Waveform.

     4. 

Press 

the 

Enter 

button.

      The 

Waveform 

menu 

displays.

  5. 

Press the Up and Down Arrow buttons to highlight the appropriate waveform.

 

 

 

 

 

6. 

Press the Enter button to accept the selection.

      The 

Waveform 

menu 

closes.

 

 

 

 

 

7. 

Press the Up and Down Arrow buttons to highlight Edit Stim.

 

 

 

 

 

8. 

Press the Enter button to accept the selection.

      The 

waveform's 

parameters 

display.

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands