Intelect® Transport Combo
48
OPERATION
STARTING, STOPPING, AND INTERRUPTING ULTRASOUND THERAPY
To apply ultrasound therapy, do the following:
1.
Ensure
the
ultrasound
applicator
is
plugged
in.
2.
On the Home screen, use the Up and Down Arrow buttons to highlight
Ultrasound.
3.
Press
the
Enter
button.
The
Ultrasound
parameters
screen
displays.
4.
Press the Up and Down Arrow buttons to highlight Frequency.
5.
Press the Enter button to select 1 or 3.3 MHz.
When the button is pressed, the frequency will toggle from 1 to 3.3 MHz and back
again as long as the button is being pressed (excluding the 1 cm
2
sound head).
An audible tone will be heard when changes are made.
NOTE:
With 2 cm
2
and 5 cm
2
sound heads, switching from 1 to 3.3 MHz
results in no change in power. When using a 10 cm
2
head with greater
than 10 watts, changing from 1 to 3.3 MHz reduces power to 10 watts.
6.
Press the Up and Down Arrow buttons to highlight Duty Cycle.
7.
Press the Enter button to display the Duty Cycle menu.
8.
Press the Up and Down Arrow buttons to highlight 10%, 20%, 50% or Continuous
duty cycle.
When the buttons are pressed, an audible tone will be heard as the duty cycle
toggles
through
the
options
on
the
LCD.
9.
Press the Enter button to accept the selection.
