manualshive.com logo in svg

Chattanooga Group Intelect Transport Combo, User Manual

Share
Download
Chattanooga Group Intelect Transport Combo User Manual Download Page 47

Intelect® Transport Combo

44

OPERATION

STARTING, STOPPING, AND INTERRUPTING ELECTROTHERAPY CONTINUED

 

3. 

Connect the Lead Wires to the appropriate electrodes.

 

 

 

 

 

 

To see a list of recommended electrodes and their preparation, see 

pages 38-41

.

 

 

 

 

 

 

NOTE:

  Do not use unnecessary force to connect the electrodes to the lead wires.

 

 

 

 

 

4. 

Place the self adhesive electrodes on the sites prescribed by a qualified practitioner.  

 

 

 

 

 

 

Make sure you press them firmly on the patient’s skin to ensure good conductivity.

  5. 

Depending on the type of waveform you intend to use and the number of patients 

 

 

 

 

 

 

you intend to treat, insert the Lead Wire into Channel 1, Channel 2, or both Lead   

      Wire 

Connections 

on 

the 

Accessory 

Panel.

Summary of Contents for Intelect Transport Combo

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands