CHART MVE 1842P-150 Operating And Maintenance Manual Download Page 159

Page: 159 / 161

MVE Biological Systems

TEC 3000 Operating and Maintenance Freezer Manual

13289499 Rev H •

158

EVNLOG?

Event Log Record Query

Input: EVNLOG? N
Returned:

XXXXX, MM/DD/YY, HH:MM, XXX.X, XXX.X, XXX.X, XXX.X

Comments:

Used to query Event Record [n] where n = record number. String

returned: Date, Time, TempA, Temp B, LN2 Level, Liquid Usage, Event Codes.

LOGPER

Set Event Log Interval

Input: LOGPER XXX
Returned:

No response

Comments:

Used to set the event log interval between 1 and 240 minutes.

Default setting is 240 minutes.

LOGPER?

Event Log Interval Query

Input: LOGPER?
Returned:

XXX

Comments:

Used to query the current event log interval.

TIME

Set the Time

Input: hh:mm:ss
Returned:

No response

Comments:

Used to set the controller Time in the format hh:mm:ss

(hour:minute:second).

TIME?

Time Query

Input: TIME?
Returned:

hh:mm:ss

Comments:

Used to query the current time.

UNID

Set Unit ID

Input: UNID XXXXX
Returned:

No response

Comments:

Used to set the controller 5-digit Unit ID. TEC 3000 Unit ID should

be between 1 and 200.

UNID?

Unit ID Query

Input: UNID?
Returned:

XXXXX

Comments:

Used to query the controller Unit ID.

Summary of Contents for MVE 1842P-150


































































































































































Search results

Summary of Contents for MVE 1842P-150

Reviews:

Related manuals for MVE 1842P-150

Brands by name

Popular brands

CHART MVE 1842P-150, Operating And Maintenance Manual

Search results

Summary of Contents for MVE 1842P-150

Reviews:

Related manuals for MVE 1842P-150

Brands by name

Popular brands