Menu Operation
– Schedule Recording
The unit is able to do schedule recording when TV is turned on or in standby mode.
1. Press
EPG
button to bring up EPG menu.
2. Select the channel you want, then press
OK
button will active timer recording
submenu. You can set up time or channel in the menu.
Record Setting:
This option is used to set the parameters for the recordings you
want to schedule. Press the
OK
button to enter the sub menu.
- Channel:
Press the
◄/► buttons to select channel.
- Start Time:
Set the start time of recording.
- End Time:
Set the end time of recording.
- Mode:
Press the
▲/▼
buttons to select record mode.
3. Press the
▲/▼
buttons to highlight different setting and press the
▲/▼/◄/►
buttons to change setting. After you have finished adjusting settings to desired
options, and press the
OK
button to save the scheduled recording.
NOTE:
•
Different schedules should not overlap and there must be at least a 1 minute time
gap to set up between two schedules.
When the time appointment is conflict, it
will produce a warning message.
•
When recording starts in standby mode, the TV front indicators will change color
and there will be no picture or sound from the unit. You can press button to
turn on the screen.
Playing the Recorded TV Programme
Option1:
After recording has finished,
press
MENU
( ) button to display the main OSD menu;
then press
▲/▼
buttons to select
PVR File System
(In DTV mode), then press the
OK
button to go into submenu.
1. Press the
▲/▼
buttons to select the Record list.
2. Use the
▲/▼ buttons to select a recorded file and press
OK
to start playback in
full screen mode.
RED
button to delete the file you no longer require.
GREEN
button to select ascend or descend page.
BLUE
button to sort programmes.
BACK
( )
button to
quit the
menu.
20
3. Press the
4. Press the
5. Press the
6. Press the
