Menu Operation
Signal Quality: Display the quality of the signal of the channel.
Once the progress bar is full, the found channels will be stored and the unit will
proceed to the search for DTV, Radio and Data.
■ ATV Manual Tuning (in ATV mode)
: Tuning the analogue
channel manually.
Press ▲/▼to select ATV manual Tuning and then press
OK/
►
button
to enter the sub-menu.
Storage To: Store the searched channel (you can adjust the
channel number by◄/►).
Current CH: Select the current channel.
Sound System: Select the sound system.
Fine Tune: Adjust the frequency of the channel finely.
Left Search:
Press the
OK
button to search up from the
current frequency.
Right Search:
Press the
OK
button to search down from the
current frequency.
Press the ▲/▼ button to select Save, and press the
OK
button to save it.
■
Audio Standard:
Set sound system for local programs (only
available in ATV mode).
■ Dynamic Rescan (In DTV mode):
Switch the Dynamic
Rescan function on or off.
■ Programme Edit:
Pr
ess▲/▼buttons to select Programme
Edit and then press OK
/►to enter the submenu.
First press the
▲/▼
buttons to select the channel that you
want to skip, delete, move and edit favorite then press OK to
assign (
√
) mark for unwanted channel.
NOTE:
When LCN are set to on, the Swap function is available.
18
