Menu Operation
specification and select EDID1.4 when source signal is
transferred byHDMI1.4 specification.
■ HDMI CEC (In HDMI mode):
Press the
OK
/► button to access
the submenu. The HDMI CEC system can be used only with
devices that have the HDMI CEC feature. You must connect an
HDMI CEC device using an HDMI cable. Some HDMI cables
may not support HDMI CEC functions.
– Device List:
Display devices that are connected to TV.
– HDMI CEC:
Switch the HDMI_CEC function on or off.
–
Auto Standby:
Switch the Auto Standby function on or off.
–
ARC:
Switch the ARC function on or off.
– Auto Power On:
Switch the Auto Power On function on or off.
■ PC Settings (Valid only in the VGA channel)
– Auto Adjust:
To adjust the all PC setting automatically.
– H.Position:
To adjust the horizontal placing of the image.
– V.Position:
To adjust the vertical placing of the image.
– Phase:
To adjust the internal signal phase.
– Size:
To adjust the screen size.
Channel Menu
Before your TV can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Antenna or a Cable system).
If the set signal type is wrong, it is possible that no
channel can be found.
■ Antenna Type (in DTV mode)
Press▲/▼buttons to select Antenna type and then press
OK
/►to enter the submenu.
Press the
▲/▼
buttons to select Air or Cable.
■ Auto Tuning
Press the
OK/
►
button to enter Auto Tuning menu.
Antenna Type is Air:
– Tune Type:
Press the
◄/►
buttons to select tune type.
(DTV, DTV + ATV, ATV.)
– Country:
Press the ◄/► buttons to select the correct
country.
–
Service Type:
Select the channel type to memories.
– Scan Mode:
Select Free, All, or Encrypted channels to
store.
–
LCN:
Select the LCN functions on or off.
–
Search:
Press the
OK
button to start the auto searching.
16
