S T A R T U P
6
INITIAL START UP
Fill Tanks with Water
¾
WASH TANK – Fill wash tank with hot water to the marked
Fill Line.
The water
temperature ought to be approximately
110
˚
to 120
˚
F (43
˚
to 49
˚
C).
¾
RINSE TANK – If equipped, fill the rinse
tank with hot water to the marked
Fill Line
.
The water temperature ought to be
approximately 75
˚
to 80
˚
F (24
˚
to 27
˚
C).
¾
SANITIZE TANK – If equipped, fill the
sanitize tank with hot water to the marked
Fill Line
. The water temperature ought to
be approximately 75
˚
to 80
˚
F (24
˚
to 27
˚
C).
Add Soap / Chemicals
B
Soap Pump
¾
WASH TANK – If your unit is equipped
with the soap injection option, then make
sure that the soap pump pick up tube is
inserted into the soap container. The soap
will automatically be injected into the
wash tank. Otherwise, manually add the
soap into the wash tank.
¾
SANITIZE TANK – If equipped, add
the appropriate sanitizing chemical to the
sanitize tank. Consult your local health
code.
Summary of Contents for Taskmaster PP-3
