M A I N T E N A N C E
¾
Carefully pull the heater and wires out, exposing the electrical connections.
¾
Disconnect the electrical Connections.
¾
Remove the gasket.
Gasket
¾
Get the new heater and slide the gasket over the wires.
¾
Connect the electrical connection and slide the wires and heater into position.
¾
Install and tighten the clamp.
¾
Install the perforated cover.
¾
Turn on the main power.
Replacing Thermocouple
¾
Turn off and lockout the incoming power to the
control panel.
¾
Remove the perforated cover located at the back
of the tank by loosening the two fasteners (see
illustration in
Replacing Heater
).
¾
Remove the clamp by loosening the wing nut.
¾
Carefully pull the thermocouple and wires out, exposing the electrical connections.
¾
Disconnect the electrical Connections.
¾
Remove the gasket.
¾
Get the new thermocouple
and slide the gasket over the
wires.
Thermocouple
Clamp
Wing nut
53
Summary of Contents for Taskmaster PP-3
