![background image](http://html.mh-extra.com/html/champion/d10/d10_installation-and-start-up-data_2588306039.webp)
D10.D15.DRS15-MANS
Apr ‘19
- 39 -
Separator Filter and Refrigerated Air Dryer (cont’d)
As previously noted, the Separator Filter is located between the Air End and the Refrigerated Dryer. It contains a
1 micron Separator Element which protects the Dryer Unit by removing liquids and solid particles 1 microns and
larger.
To replace a dirty Filter Element:
•
Shut the Compressor Unit off.
•
Bleed any compressed air from the system to ensure there is no pressure at the Filter.
•
Unscrew the Bowl from the assembly, exposing the dirty Filter Element.
•
Pull the Filter Element out of the Canister Head
•
Clean any debris from the inside of the Bowl
•
Remove the O-ring from the inside of the Canister Head
•
Install the new O-ring making sure it is properly seated
•
Place the new 1 micron Separator Filter Element into the Bowl (the filter is self-centring).
•
Screw the Canister with the Element inside it to the Canister Head until the indicators line up.
•
Gauge will return to
green
when Filter is once again under pressure.
Typical Separator Filter
Arrow Indicates
Direction of Air Flow
Dual Indicating Gauge (DF002)
Arrow pointing to Green = Filter Element is Clean
Arrow pointing to Red = Filter Element is Dirty
Float Drain (DF003)
Bowl which Contains Filter Element (DF65A)
The label shown above is included with a
replacement Filter Element, and should be
affixed to the outside of the Bowl for future
reference.
Filter Element Replacement
Alignment
Indicators:
triangles on
canister and
head will align &
prevent further
tightening when
canister is
secured to the
head
Summary of Contents for D10
Page 34: ...D10 D15 DRS15 MANS Apr 19 34 Variable Speed Drive cont d Menu Button Navigation Chart ...
Page 46: ......
Page 48: ......
Page 50: ......