![background image](http://html.mh-extra.com/html/champion/d10/d10_installation-and-start-up-data_2588306018.webp)
D10.D15.DRS15-MANS
Apr ‘19
- 18 -
Maintenance Procedures (cont’d)
Intake Valve Repair Kit
The Intake Valve Assembly is located directly below the Intake Filter,
and opens and closes to allow air to enter the Air End.
To repair the Intake Valve:
•
Remove the Intake Filter from the top of the Intake Valve
Assembly.
•
Remove the DIN Connector from the Solenoid Valve
attached to the Intake Valve Assembly.
•
Remove the Intake Valve Assembly by way of removing the
(4) Screws attaching it to the Air End
•
Place a clean rag over the Air End to ensure that nothing
enters it.
•
Remove the (2) Screws on the Bottom Plate of the Intake
Valve. This will allow the internal components to be removed.
•
Clean the internal surfaces of the Intake Valve, flip over,
insert the new components, and put the Bottom Plate in
place.
•
Secure the Bottom Plate.
•
Press the Internal Plunger of the Intake Valve to ensure that
it works correctly.
•
Remove the rag from the Air End, install the O Ring, and
secure the Intake Valve.
•
Reconnect the DIN Connector to the Solenoid, and re-attach
the Intake Filter.
Please order (1) ‘
DSC-001950
’ Intake Valve Repair Kit. Shown at
right are the various components associated with the Intake Valve
Repair Kit.
Changing the Scavenge Line ‘In-Line’ Filter
The ‘
DSC-612
’ In-Line’ Filter is located in the Scavenge
Line between the Air-Oil Separator and the Air End, and
removes any particles from the oil before it enters the Air
End. The Filter must be replaced every 4000 hours to
ensure the proper flow of oil through the Scavenge Line.
When re-assembling the parts, use Loctite thread
sealant. Do not use Teflon tape, as the tape could come
loose and obstruct the passage of oil.
Intake Valve
Air End
In-Line Filter
Solenoid Valve Replacement
First remove existing solenoid valve from Intake Valve Assembly
by loosing the brass housing and threaded nipple.
To install new Solenoid Valve:
•
Assemble various components of new solenoid valve
shown at right to the Intake Valve Assembly.
Please order (1) ‘
DSC-001951
’ Solenoid Valve Repair Kit. Shown
at right are the various components associated with the Solenoid
Valve Repair Kit.
DIN
Connector
Bottom
Plate
DIN
Connector
Summary of Contents for D10
Page 34: ...D10 D15 DRS15 MANS Apr 19 34 Variable Speed Drive cont d Menu Button Navigation Chart ...
Page 46: ......
Page 48: ......
Page 50: ......