D10.D15.DRS15-MANS
Apr ‘19
- 14 -
Preventative Maintenance Schedule (cont’d)
Maintenance Item:
Daily
Maintenance Interval (in 000’s of Hours)
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Compressor Room
Temperature
Inspect
Ambient Temperature should be between 10°C and 40°C (50°F and 104°F)
Cleanliness
Inspect
Air Compressor Unit
Check Oil Level
Inspect
Take Oil Sample (See Note a)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Replace Oil
(See Note b)
(1)
X
X
X
X
X
X
X
X
X
X
Replace Oil Filter
(2)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Replace Air / Oil Separator
(3)
X
X
X
X
X
X
X
X
X
X
Replace Air Intake Filter
(4)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Check Belt Tension
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Replace Belts
X
X
X
X
X
Replace Tank Relief Valve
X
X
X
Replace Solenoid
(5)
X
X
X
X
X
Rebuild Intake Valve
(6)
X
X
X
X
X
Rebuild Thermo Valve
(7)
X
X
X
Rebuild Minimum Pressure Valve
(8)
X
X
X
X
X
Replace Scavenge Line Filter
(9)
X
X
X
X
X
Motor Bearing Lubrication
Refer to Motor Manufacturer’s Recommendations on Page 11
Notes:
a) Participation in Champion’s oil analysis sampling program is required to receive the extended
warranty. An oil sample must be sent to our lubricant analysis laboratory
every 2000 hours or every
6 months
, whichever occurs first. Any recommendations detailed in the oil analysis report must be
followed as outlined in the report. Oil sample bottles are to be obtained from your local authorized
Champion distributor.
b) The Champion oil used in the maintenance schedule is rated as a 4000 hour oil. A complete Oil
change must be done every 4000 hours of Unit operation, or every 12 months, whichever occurs first.
If other champion lubricant is used, please refer to the Warranty on Page 43 for further information.
c)
If a component, during a regular inspection, has proven to be defective or unfit for regular operation, it
must be repaired or replaced.
Parts and Repair Kits based on the above chart are as follows:
(1)
Rotor Lub 4000 Oil:
28H166
(2)
Oil Filter
DSC-603-CH
(3)
Air / Oil Separator:
DSC-302-CH
(4)
Air Intake Filter
DSC-001931-CH
(5)
Solenoid
DSC-001951
(6)
Intake Valve Repair Kit
DSC-001950
(7)
Thermo Valve Repair Kit:
DSC-111-1
(8)
Minimum Pressure Valve Kit:
DSC-410
(9)
Scavenge Line In-Line Filter
DSC-612
Air End Shaft Seal Kit
DSC-002718
Control Panel Ambient Air Filter
DSC-001447
VSD Control Panel Separation Foam
DSC-002719
(VSD units only)
As noted previously, the ‘
MK-D1015-CH
’ Maintenance Kit includes the following items:
(2)
DSC-603-CH
Oil Filter
(1)
DSC-612
In-Line Filter
(1)
DSC-302-CH
Air/Oil Separator Filter
(1)
308KBA6003
Oil Sample Kit
(2)
DSC-001931-CH
Air Filter
Use only ‘Genuine Champion’ parts and kits for your Champion Screw Compressor, this to ensure that
a) it works at it’s optimum performance level and
b) you maintain your Champion Compressor Warranty.
Summary of Contents for D10
Page 34: ...D10 D15 DRS15 MANS Apr 19 34 Variable Speed Drive cont d Menu Button Navigation Chart ...
Page 46: ......
Page 48: ......
Page 50: ......