APR 2018
CMT-330 Three Knife Trimmer
3-3
3. Operator's Guide
Open Door Indicators
This area of the console provides the operator
with any indication of a door being open. This is
helpful because the trimmer will not run with an
open door, and not all doors are visible from the
operator’s standpoint.
IN/mm Scale
The IN/mm scale can be used for measuring the
size of the start book while programming a job.
The scale can also be used to verify the size of
a trimmed book.
Start Button
The green start button is used to switch on the
hydraulic pump and begin to trim books. A re-
mote start button is located at the back of the
machine.
Stop Button
The red stop button is used to switch off the hy-
draulic pump and stop trimming books. A re-
mote stop button is located at the back of the
machine.
LCD Screen
The LCD screen is used to program and view
jobs. It also lists any errors or messages. A
message is displayed on the screen when the
status light on top of the machine blinks.
Keypad
The keypad is used to enter values into a pro-
gram, scroll through programs, and navigate
through maintenance screens.
3.1.2 Key Descriptions
Number Keys
Number keys are used to write number values
on the display.
Decimal Point
This decimal key is used to write a decimal point
on the display.
Priority Add Key
The priority add key is used to input fractional
numbers when combined with a whole number.
An underscore (_) is displayed on the screen af-
ter the key is pressed. 1_1/2 is an example of a
number entered using the priority add key. This
is equivalent to 1.500.
Addition Key
The plus key is used to add numbers in the dis-
play.
Subtraction Key
The minus is used to subtract numbers in the
display.
Multiplication Key
The multiply key is used to multiply numbers in
the display.
Division Key
The forward slash key is used to divide numbers
in the display.
Send Key
The send key is used to instruct the computer to
change the machine setup to match newly en-
tered book dimensions.
Clear Key
The clear key is used to clear an entry value or
clear an status message.
Summary of Contents for CMT 330
