CF MOTO CF1000UTR-2, Owner'S Manual, Page: 98 / 179

SAFE OPERATION - DRIVING SAFELY
94
Shallow Water Crossing
Water can be a unique hazard. If it is too deep the vehicle may “float” and topple. Check the water depth and
current before you attempt to cross any water. Water should not exceed depth equal to the bottom of the floor
board to safely cross.
Beware of slippery surfaces such as rocks, grass, logs, etc., both in the water and on its banks. A loss of
traction may occur. Do not attempt to enter the water at high speed. Water will affect the braking ability of
your vehicle. Make sure you dry the brakes by applying them several times while driving slowly after the
vehicle leaves the water.
What to do if vehicle is submerged
If the vehicle becomes immersed, it will be necessary to have it transported to your dealer as soon as
possible. Do not attempt to re-start the engine, as water may have been ingested into the cylinders, which
can cause internal damage.
Riding in Mud, Ice or Snow
When performing a pre-ride inspection, pay special attention to locations on the vehicle where mud, ice and/
or snow accumulations may obstruct visibility of the tail lamps, clog ventilation openings, block the radiator
and fan, and interfere with the movement of controls. Before starting with your vehicle, check the steering,
throttle and brake pedals for interference-free operation.
Whenever this vehicle is driven on a snow or ice covered path, the tire grip is generally reduced, causing the
vehicle to react differently to control inputs from the operator.