123
MAINTENANCE
Engine oil maintenance- 1000 engine only
NOTE:
The 1000 engine has separate engine and transmission oil drain
/ fill locations. It also has an internal sump strainer behind a cover
that can be checked and cleaned during an oil change.
Oil level check (1000)
1. Place the vehicle on a level surface.
2.
If the engine was running, wait a sufficient amount of time for
the oil to settle and cool.
3. Unscrew the crankcase Oil dipstick
2
, remove it, and wipe off
with a clean cloth.
4.
Insert the dipstick into the oil filler hole. Do not fully reinstall it.
5. Remove the dipstick and check the oil level indication. Maintain
the oil level between the upper and lower indicators.
6.
Reinstall the dipstick into the oil filler hole, and hand-tighten it.
Oil and filter change (1000)
1. Place the vehicle on a level surface.
2.
If the engine was running, wait a sufficient amount of time for
the oil to settle and cool.
3. Place an oil pan under the engine to collect the used oil.
4.
Remove the engine oil drain bolt from the bottom of the
crankcase and drain the oil.
5.
Place a new sealing washer on the drain bolt, then assemble
and tighten the drain bolt to 22 ft-lb. (30 N•m).
2
MAX
MIN
1000 Engine
Oil Dipstick
Location
1
1
800
500
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...