125
MAINTENANCE
Transmission oil maintenance- 1000 engine only
Oil level check (1000)
1. Place the vehicle on a level surface.
2.
If the engine was running, wait a sufficient amount of time for
the oil to settle and cool.
3. Unscrew the transmission oil dipstick
2
, remove it, and wipe
off with a clean cloth.
4.
Insert the dipstick into the oil filler hole. Do not fully reinstall it.
5. Remove the dipstick and check the oil level indication. Maintain
the oil level between the upper and lower indicators.
6.
Reinstall the dipstick into the oil filler hole, and hand-tighten it.
Oil change (1000)
1. Place the vehicle on a level surface.
2.
If the engine was running, wait a sufficient amount of time for
the oil to settle and cool.
3. Place an oil pan under the engine to collect the used oil.
4.
Remove the transmission oil drain bolt at the bottom of the oil
fill location and drain the oil.
5.
Place a new sealing washer on the drain bolt, then assemble
and tighten the drain bolt to 22 ft-lb. (30 N•m).
6.
Add the specified amount of recommended transmission oil,
and then reinstall the transmission oil dipstick and hand-tighten
it.
NOTE:
Transmission oil type –SAE75W-90 GL-5 Capacity - 20 oz.
(0.6L)
2
MAX
MIN
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...