132
MAINTENANCE
Cooling system
Coolant level inspection
1. Place the vehicle on a level surface.
2. Inspect the coolant level in the reservoir
1
, which can be
viewed through the left side inner fender area.
3.
If the coolant is at or below the lower limit mark; remove the
access cover and the reservoir cap
2
. Add coolant to the
upper limit mark, install the reservoir cap, and then reinstall the
access cover.
NOTE:
Check the coolant level in the coolant reservoir when the engine is
cold, as the coolant level will vary with engine temperature.
Coolant reservoir capacity: 380mL ~ 600mL
CAUTION
If water is added, have your dealer check the antifreeze content
of the coolant as soon as possible. Never add hard water or salt
water, as it is harmful to the engine. Softened tap water may be
used if distilled water is not available. The radiator fan operation
is automatically switched on or off according to the coolant
temperature in the radiator during operation.
1
2
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...