129
MAINTENANCE
Rear gear case oil check
1. Place the vehicle on a level surface.
2.
Remove the oil filler bolt
3
and check the oil level. The level
should be up to the brim of the hole. If the level is low, add
sufficient oil to raise it to the specified level.
3.
Install the oil filler bolt and tighten it to 18.4 ft-lb. (25 N•m).
Rear gear case oil change
1. Place the vehicle on a level surface.
2. Place an oil pan under the gear case to collect the used oil.
3.
Remove the oil drain bolt
4
at the bottom of the gear case and
drain the oil.
4.
Install the oil drain bolt and tighten it to 18.4 ft-lb. (25 N•m).
5.
Add sufficient oil to raise the level up to the brim of the hole.
6.
Install the oil filler bolt and tighten it to 18.4 ft-lb. (25 N•m).
NOTE:
Approximate rear gear case oil capacity: 13.5 oz. (400mL)
3
4
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...