121
MAINTENANCE
Oil and filter change (500/800)
1. Place the vehicle on a level surface.
2.
If the engine was running, wait a sufficient amount of time for
the oil to settle and cool.
3. Place an oil pan under the engine to collect the used oil.
4. 800- Remove the passenger seat and inspection cover to
access the oil drain bolt, fill, and filter location.
5. 500- Remove the passenger seat and inspection cover to
access the oil fill location.
6.
800- Remove the engine oil drain bolt
1
and drain the oil from
the crankcase.
7.
500- Remove the engine oil drain bolt
2
from the bottom of
the crankcase and drain the oil.
8. 800/500- Place a new sealing washer
3
on the drain bolt, then
assemble and tighten the drain bolt to 22 ft-lb. (30 N•m).
NOTE:
The 500 engine has an internal sump strainer behind a cover that
can be checked and cleaned during an oil change. The 800 engine
internal sump strainer is not serviceable.
1
2
3
800 Engine Oil Drain Bolt
500 Engine Oil Drain Bolt
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...