126
MAINTENANCE
Engine valve clearance adjustment
The intake and exhaust valve clearances change with use of the vehicle, which can result in improper fuel/air
supply or engine noise. To prevent this, the valve clearances must be adjusted according to the maintenance
schedule. This adjustment should be performed by a professional service technician. Contact your dealer for
service.
NOTE: (all engines)
Intake valve clearance (cold engine): 0.003 in. ~ 0.005 in. (0.08mm ~ 0.12mm)
Exhaust valve clearance (cold engine): 0.005 in. ~ 0.007 in. (0.12mm ~ 0.18mm)
Engine Idle Speed
This vehicle is equipped with an electronic fuel injection system. The throttle body is a vital part of the fuel
system which requires very sophisticated adjustment, and was set at the factory. There are no consumer
provisions to adjust engine idle speed. If the settings are disturbed, poor engine performance and damage
may result. Check the engine idle speed for stability or an abnormal engine idle condition and contact your
dealer for service if necessary.
NOTE:
1000/800 - Engine idle speed: 1300 rpm ± 100 rpm (engine at operating temperature)
500 - Engine idle speed: 1500 rpm ± 150 rpm (engine at operating temperature)
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...