136
MAINTENANCE
4. Use the spark plug socket and wrench
2
from the tool kit to
remove the spark plug.
5. Check the spark plug gap
A
using a thickness gauge. Adjust
the gap if necessary.
NOTE:
Specified spark plug: DCPR8E (NGK)
Spark plug gap: 0.035 in ~ 0.045 in. (0.8 mm ~ 0.9 mm)
6.
Clean the gasket surface. Wipe off any grime from the threads.
7.
Install spark plug and tighten to specified torque.
NOTE:
Spark plug torque: 14.8 ft-lb. (20 N•m). If a torque wrench is not
available when you are installing a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 turn past finger tight.
8. Install the spark plug cap.
9.
Install the cargo box access panel. Torque the fasteners to 7.3
ft-lb. (10 N•m).
2
A
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...