Programming via programming cable
OMEGA FLEX wall terminals WT-I/WT-II Page 47 of 80
8
Programming via
programming cable
You can also program your locking devices via a cable connection
(see also figure on page 48).
For this purpose, you require the optional programming cable.
The following components are required:
State-of-the-art standard PC (No. 1,2) with Windows XP™ or
Windows 7™ operating system, 1 GHz processor or higher, at
least 1 GB of RAM, at least 1 GB of free hard disk space
CD-ROM drive for installing the software from data media
One free USB port for the use of the programming cable
(optional)
Monitor with a resolution of 1,024
768 pixel or higher, or a
resolution of 1,024
600 pixel (netbook)
CEStronics Suite software
A valid licence for CEStronics Suite software
At least one locking device (4).
Programming cable (No. 3, optional)
Satisfy yourself that the OMEGA software has been installed
without errors.
If you have to install drivers manually, follow the directions in
the "Help on the software CD" chapter of the Mifare software
Operating Instructions.
The USB programming cable supports hot
plugging, i.e. you can pull the cable without prior
de-registration of the device at the USB port.
