Fitting the wall terminal
OMEGA FLEX wall terminals WT-I/WT-II Page 39 of 80
Ensure that the in-wall switch box has been installed
horizontally.
The mounting holes of the wall terminal must always be
aligned horizontally, also when the wall terminal is
installed on in-wall switch boxes.
Ensure that all required cables have been guided through the
switch box without being damaged or squeezed.
Establish all required wire connections as described in the
"Connections" chapter on page 28 ff.
1.
Fig. 16 – fasten the wall terminal
Fasten the wall terminal
with two 2.5
20 mm
universal screws on the
in-wall switch box.
