Fitting the wall terminal
OMEGA FLEX wall terminals WT-I/WT-II Page 37 of 80
6.2.4
Fastening the fitting frame of the wall
terminals
The wall terminal can be fitted with or without the fitting frame.
Whether or not you use the fitting frame depends on the local
installation conditions.
If you do not use a fitting frame, a wired in-wall switch box is
required.
Fastening the fitting frame is similar for all versions of the wall
terminal. The following describes the fastening for the wall
terminal in the CES standard housing:
Follow the steps for disassembling the wall terminal on pages
35.
The selection of the fasteners depends on the material of the wall
(or ceiling, etc.) on which the wall terminal is to be installed. For
fitting the wall terminal with the fitting frame on mineral walls
(stone, concrete) you require the fasteners supplied. On mineral
walls, the fitting frame is fastened using plugs and universal
screws.
For fastening the frame on other materials, purchase suitable
fasteners from your specialized dealer for fastening engineering.
Ensure that the mounting holes of the wall terminal are aligned
horizontally.
