Fitting the wall terminal
Page 42 of 80
OMEGA FLEX wall terminals WT-I/WT-II
The length of the cable between the control module
and the reader module must not exceed 20 metres.
Only the supplied cable may be used. Do not extend
the cable!
Only use J-Y(St)-Y 2
2
0.6 mm² cables for the
connection between the control unit and the reader
module.
The mounting holes of the wall terminal must always
be aligned horizontally, also when the wall terminal is
installed on in-wall switch boxes.
Fasten the control module and the reader module with two
2.5
20 mm universal screws each on their respective in-wall
switch box.
Fig. 20 – Fasten the control module and the reader module
