Fitting the wall terminal
Page 36 of 80
OMEGA FLEX wall terminals WT-I/WT-II
1.
Fig. 12 – lift the wall terminal
Lift the wall terminal from the
fitting frame.
You now hold the control module
with the cover in your hands.
2.
Fig. 13 – release the cover
Release the cover carefully
from the control module using
a wide slotted-head
screwdriver.
To do so, insert the slotted-
head screwdriver into the
recess as shown below.
3.
Fig. 14 – lift off the cover
Lift off the cover.
4.
Fig. 15 – fit the wall terminal
You can now fit the control
module through the two oblong
holes (1).
This completes the disassembling.
