Introduction
Page 18 of 80
OMEGA FLEX wall terminals WT-I/WT-II
5.2.2
WT-II
Only use J-Y(St)-Y 2
2
0.6 mm² cables for the
connection between the control unit and the reader
module.
After the cable has been laid, the connection must be
established, see page 31 ff.
Fig. 2 – Scope of delivery WT-II
1
Reader terminal (outside terminal) for wall terminal type
WT-II (housing: CES Standard)
2
Fitting frame
3
Controller terminal type WT-II (inside terminal) with
cable for permanent connection with the reader terminal
(not connected to reader terminal when supplied,
housing: CES Standard)
4
Fitting frame
5
4 universal screws 2.5
20 mm
6
4 fastening screws 3
30 mm with 4 plugs
