Cerbos QUAD 10, User And Service Manual, Page: 32 / 38

Moreover, there are two control modes responsible for stabilization of the boiler
temperature : Standard and Fuzzy Logic . .
A detailed description of all operating modes and control modes are located ± in the
accompanying s instruction s controller and the burner.
6.6 Cleaning the boiler
WARNING! - SAFETY INFORMATION

Switch the boiler off before cleaning

Wait until the furnace cools down - risk of burns
WARNING! - DANGER OF BURNING !!!

Switch the boiler off before cleaning

Use protective clothing (gloves, goggles)

Wait until the furnace cools down
The boiler can be cleaned of ash using a brush and dustpan or a vacuum cleaner. The manual
presents cleaning of the boiler with a vacuum cleaner. The tool attached to the boiler (brush / rod)
should be used when cleaning the smoke tubes.
Table X - Summary of the frequency of cleaning of individual components
No. action Cleaning frequency
1 Ash tank (WO, WZO)
Depending on the quality and quantity of the
burnt pellets - once every 2-6 months
2
Flame tubes once a month
Front compartment
once a month (WO, WZO, WZO + gp )
once every 2 weeks (W, WZ, WZ + gp )
3 The furnace chamber (W, WZ, WZ + gp ) once a week
4 once every 6 months once every 6 months
5 Burner once a week
1. Emptying the ash container (WO, WZO , WZO + GP )
In order to empty the ash container , lift the handle (1) and pull the container (2) out of the boiler.
Figure 31 - Removing the ash pan