Cerbos QUAD 10, User And Service Manual, Page: 19 / 38

5.3 Change of door assembly sides
WARNING!
Before removing the door, first remove the burner.
The manufacturer can supply the boiler with the door that opens to the right or left. If necessary,
the installer or user can change the door hinge side. Figure 14 shows how to remove or install the door.
The sequence of steps when removing the door:
1. Unscrew and remove the burner
2. Remove the door handle
3. Unscrew the main screws (hinge) and remove the door,
4. Unscrew the hinge bar
5. Unscrew the blanking screws
6. Door catch - unscrew and disconnect the limit switch wires
7. Break a hole for a hook on the other side of the exchanger (use appropriate
tools for this)
8. Screw back all parts symmetrically to the opposite side of the boiler in the
reverse order.
Figure 14 - Changing the door assembly sides
5.4 Disconnecting the chimney installation
WARNING!
It is not allowed to connect any additional devices to the flue to which
the boiler is connected, nor to use it additionally for other purposes (e.g.
ventilation) .