I-4
Section I - SAFETY PRECAUTIONS (cont’d)
ONLY AUTHORIZED AND TRAINED PERSONNEL
SHOULD BE PERMITTED TO OPERATE THIS WRECKER
UNSUPERVISED
TRAINED PERSONNEL ARE THOSE WHO HAVE WORKED
UNDER EXPERIENCED SUPERVISION AND HAVE PERFORMED
ALL WRECKER MANEUVERS, HAVE READ THE MOUNTING,
OPERATING AND MAINTENANCE MANUAL, WARNINGS AND
PRECAUTIONS, AND UNDERSTAND AND HAVE HAD
EXPLAINED TO THEM BY THEIR EMPLOYER THE HAZARDS OF
OPERATING THE WRECKER. THEY MUST BE FAMILIAR WITH
THE HAZARDS OF OPERATING AT A SITE WHERE ELECTRIC
POWER LINES, IRREGULAR GROUND CONTOUR, WATER, ICE,
MUD, OR OTHER CONDITIONS CAN INTERFERE WITH
ORDINARY CAREFUL OPERATION OF THIS WRECKER.
AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND
OTHERS TO DEATH OR SERIOUS INJURY.
STAND CLEAR
WHILE OPERATING
OUTRIGGERS
USE SAFETY CHAINS
ON ALL TOWING AND
LIFTING APPLICATIONS
Section IVA - OPERATING INSTRUCTIONS
WHEEL LIFT (cont’d)
4A.13
SPRING LIFT BRACKETS (cont’d)
(e) Raise the boom until the spring lift brackets are properly
seated under the springs at the front spring brackets. See
Figure 4A.22.
(f) Insert the spring lift bracket retaining pin through the lowest
unobstructed hole of the spring lift bracket and secure with
the safety pin.
(g) Attach safety chains around the springs, brackets and
crossbar in such a manner as to prevent any movement to
front or rear.
(h) Raise the vehicle to the desired height for towing and retract
boom pulling vehicle as close as possible while maintaining
enough distance for sharp turns.
IVA-18
Summary of Contents for 925
